TFP3051 - Hickey Metal Fabrication

[Page 1] [Page 2] [Page 3] [Page 4] [TFP3051]

FFJ Plasma Technology, Winds of Change, Feb. 2007 The February 2007 issue of FFJournal has an article titled "Winds of Change, A new kind of twister hits Hickey Metal Fabrication". This article describes Hickey Metal Fabrication's experience with the Twister TFP3051.

Below and on the next few pages, are photos of the TFP3051 at Hickey Metal Fabrication.
TFP3051, 5 x 10 ft., 30 kW Fine Plasma TFP3051, 5 x 10 ft., 30 kW Fine Plasma
TFP3051, 5 x 10 ft., 30 kW Fine Plasma TFP3051, 5 x 10 ft., 30 kW Fine Plasma
The Twister TFP3051 featuring a 5 ft. x 10 ft. cutting area and 30 kW (150 Amp) Fine Plasma torch is available NOW!
The TFP3051 has a maximum working height of 5 in. (125 mm). The Twister TFP3051 with High Body Factory Installed Option extends the maximum working height to 11.8 in. (300 mm).
If you need larger table sizes or more power, check out the Twister TFPL Series featuring table widths of 8 or 10 feet, in 20 or 40 foot lengths, with either the 30 kW or 60 kW (300 Amp) Fine Plasma torch.