 |
|
|
ZPMC - Shanghai Port Machinery uses TFPL Machines
This extended length TFPL3084 machine (28 meters, 92 feet)
was installed in the Changzhou factory in April of 2006.
Two other extended length TFPL machines were installed in
Shanghai in June of 2006. These were a TFPL6014 (60 kw, 28 meter) machine
and a TFPL3014 (30 kW, 23 meters).
ZPMC produces container cranes and machinery used
in ports worldwide. The photo on the right shows ZPMC
cranes used in the container terminal in Hamburg, Germany.
See more about the ZPMC TFPL Machines...
TFPL Series
machines feature 30 kW (150 Amp) or 60 kW (300 Amp)
Twister Fine Plasma. They come in widths of 8 ft.
or 10 ft. With standard lengths of 20 ft. or 40 ft.
The length of the machines can be extended in
one meter increments up to 30 meters (about 100 ft.).
| |
Root Twister TFPV Series Bevel Cutters
The Root Twister TFPV Series cutting machines feature
the Twister Fine Plasma Torch with Bevel Cutting Head.
Using the bevel cutting head, one or two pass cutting can be used to
produce beveled edges for welding. A CCD Camera mounted above the torch
is used to compensate for piece movement after the first cut. This produces
very accuate welding grooves.
Read more about the TFPV
| |
Twister Fine Plasma
Komatsu's
Twister Fine Plasma products represent
the latest technology in plasma cutting of metals
that started with the first line of Fine Plasma
cutting machines in 1989. In the 1990's through
today the Komatsu Fine Plasma technology has been
the backbone of the
Rasor Series
of Fine Plasma
Cutting Machines recognized for the high quality
precision cutting and outstanding service and support.
The Twister Series continues this tradition,
adding more power and patented technology enhancements that
produce superior cut surface finishes to laser
at a fraction of
the initial cost, production time, and production cost.
The Twister Series is available. Expand your production
capacity and start saving now!
| |
TFP3051 30 kW 5 x 10 ft.
The
TFP3051
features a 5 ft. by 10 ft. cutting
surface and the Twister 30 kW (150 Amp) Fine Plasma
torch. It will cut Mild Steel up to 1" thick,
Aluminum up to 5/8", and Stainless Steel up to 3/4".
It includes the QuickSilver process that produces
superior cutting speeds and edge quality when cutting
Stainless Steel. Cutting speeds are improved and dross
is reduced due to
the high power plasma unit and high speed Twister
gas. Pierce times are reduced due to incorporating
automatic gas change during the touch sensor cycle.
Cut quality is improved by control of main gas flow
and arc mode based on hole size. Spraying anti-spatter
directly through the torch improves hole cut quality
and consumables life. The push-pull zoned exhaust system
greatly reduces fumes while cutting. A mechanical
spatter splash shield is activated during piercing.
| |
TFPL Series 30 and 60 kW, 8 or 10 ft. by 20 or 40 ft.
The
TFPL Series features larger table sizes,
and all of the cutting technology
enhancements described above with the TFP3051.
Tables are available in 8 or 10 ft. widths
and 20 or 40 ft. lengths. Choose either
the 30 kW (150 Amp) or 60 kW (300 Amp)
Twister Fine Plasma Unit and Torch.
The 60 kW Fine Plasma includes the cutting
capabilities of the 30 kW, but extends the
maximum cutting capacity for Mild Steel to
1.5" by using the higher plasma power unit and larger
nozzle sizes. A light curtain and tape emergency
stop are included for safety. Ultra-solid carriage,
and linear guides achieve high quality, precision
cutting.
|
|
Rebuilt and Recertified Rasors
A Rebuilt and Recertified Rasor KCR-0951 5 x 10 ft. 90 Amp Fine Plasma Cutting System
is available.
This is a 1995 model that has been
completely rebuilt and recertified to original positional accuracy
Used Rasor Cutting Machines
are also available.
If you have a used Rasor in good condition that you would like to sell,
send us photos and a description, and we will list it on
our website.
| |
Consumables, Spare Parts, PSPs
Keep your current Rasor in top running condition with
our
Planned Service Programs.
Consumable and Spare Parts are available for all Twister, Rasor,
and KPCL machines. Order by phone, FAX, or
online!
| |
 |
You are receiving
the Twister Newsletter because you have expressed an interest in Komatsu Fine Plasma Twister or Rasor products.
For comments or
questions regarding this newsletter, please
contact the webmaster@fineplasma.com.
UnSubscribe
| Subscribe
|
Cutting Technologies Division
Komatsu America Industries LLC
92 Cummings Park
Woburn, MA 01801
www.fineplasma.com
Phone: 800-707-2767 Fax: 781-782-0506
|
|
For a complete description of
our practices with respect to use and disclosure
of your information, click here: Privacy
Copyright © 2006 Cutting Technologies Div. KAI LLC
All rights
reserved. |
| |