 |
|
|
Twister Fine Plasma
Komatsu's
Twister Fine Plasma products represent
the latest technology in plasma cutting of metals
that started with the first line of Fine Plasma
cutting machines in 1989. In the 1990's through
today the Komatsu Fine Plasma technology has been
the backbone of the
Rasor Series
of Fine Plasma
Cutting Machines recognized for the high quality
precision cutting and outstanding service and support.
The Twister Series continues this tradition,
adding more power and patented technology enhancements
that
produce superior cut surface finishes to laser
at a fraction of
the initial cost, production time, and production cost.
The Twister Series is available. Expand your production
capacity and start saving now!
| |
TFP3051 30 kW 5 x 10 ft.
The
TFP3051 features a 5 ft. by 10 ft. cutting
surface and the Twister 30 kW (150 Amp) Fine Plasma
torch. It will cut Mild Steel up to 1" thick,
Aluminum up to 5/8", and Stainless Steel up to 3/4".
It includes the QuickSilver process that produces
superior cutting speeds and edge quality when cutting
Stainless Steel. Cutting speeds are improved and dross
is reduced due to
the high power plasma unit and high speed Twister
gas. Pierce times are reduced due to incorporating
automatic gas change during the touch sensor cycle.
Cut quality is improved by control of main gas flow
and arc mode based on hole size. Spraying anti-spatter
directly through the torch improves hole cut quality
and consumables life. The push-pull zoned exhaust system
greatly reduces fumes while cutting. A mechanical
spatter splash shield is activated during piercing.
| |
TFPL Series 30 and 60 kW, 8 or 10 ft. by 20 or 40 ft.
The
TFPL Series features larger table sizes,
and all of the cutting technology
enhancements described above with the TFP3051.
Tables are available in 8 or 10 ft. widths
and 20 or 40 ft. lengths. Choose either
the 30 kW (150 Amp) or 60 kW (300 Amp)
Twister Fine Plasma Unit and Torch.
The 60 kW Fine Plasma includes the cutting
capabilities of the 30 kW, but extends the
maximum cutting capacity for Mild Steel to
1.5" by using the higher power plasma unit and larger
nozzle sizes. A light curtain and tape emergency
stop are included for safety. Ultra-solid carriage,
and linear guides achieve high quality, precision
cutting.
|
|
 |
You are receiving
the Twister Newsletter because you have expressed an interest in Komatsu Fine Plasma Twister or Rasor products.
For comments or
questions regarding this newsletter, please
contact the webmaster@fineplasma.com.
UnSubscribe
| Subscribe
|
Cutting Technologies Division
Komatsu America Industries LLC
92 Cummings Park
Woburn, MA 01801
www.fineplasma.com
Phone: 800-707-2767 Fax: 781-782-0506
|
|
For a complete description of
our practices with respect to use and disclosure
of your information, click here: Privacy
Copyright © 2006 Cutting Technologies Div. KAI LLC
All rights
reserved. |
| | | |