TFPV6084 Bevel Cutter, J.T. Cullen, Illinois, December 2008

This extended length Twister TFPV6084 fine plasma bevel cutting machine was installed in J.T. Cullen, Illinois in December 2008. [Next]
TFPV6084, 8 x 55 ft., 60 kW Fine Plasma
J.T. Cullen, Illinois
TFPV6084 Bevel Cutting Machine, 60 kW (300 Amp)
Maximum plate cut at maximum 45 degree bevel is 8 ft. by 55 ft.
This machine installed in December 2008 in Illinois is an extend length (55 ft.) Twister TFPV Bevel Cutting machine. Lengths of TFPV and TFPL Series machines can be extended in 1 meter increments up to 30 meters (about 100 feet). The TFPV machines are also extended width so that the full 8 ft. plate width can be cut at the maximum bevel angle of 45 degrees. Because of the extended width and extra weight of the bevel cutting torch mount, the beam is fortified and extra support is added to maintain cutting accuracy.

The standard Twister TFPL Series feature table widths of 8 or 10 feet, in 20 or 40 foot lengths, with either the 30 kW or 60 kW (300 Amp) Fine Plasma torch. For smaller tables, see the TFP3051 which has a 5 ft. x 10 ft. table and the TFP3062 which has a 6 ft. x 12 ft. table. Both have the 30 kW (150 Amp) Twister Fine Plasma.

Root Twister News Release, November 14, 2006 (258 kb, 2 Pages) *
Specification is in metric units. Units in inches are approximate.
Technology in the TFP3051, TFPL Series, and TFPV Series is protected by US Patents, and other Patents Pending.
* Adobe Acrobat Reader is required to view PDF files. Download and Install Adobe Acrobat Reader